Flooring and Runners, Marbelized black with extra gloss made with NR : SBR blend.

Flooring and Runners, Marbelized black with extra gloss made with 100% Synthetic..

Nitrile sheeting.

Resistant to grease Petroleum Product and organic solvent of non Polar type

Withstands temperature of 200 ° C

Resists acid, alkaline, oils and other organic and inorganic chemicals

Suitable for gaskets and serves as packing material.

Sandwich with plain or fabric finish sheeting with 2 layers of Nylon insertions

Can use as a packing material

Insertions could be 1-4 depending on the thickness of the final product

Resistant to ozone, general weathering, sunlight (UV) and heat, resistant to salt water chemicals and withstands high voltage up to 40,000 volts. (4-6mm sheets)

Very high abrasion resistant and suitable for low temperature applications. Good ice traction

Ideal for fire hazardous areas, as the flooring is inherent with a combination of properties for resisting fire.

Does not emit chlorine or chlorinated gaseous compounds such as hydrochloric acid fumes, sulfur monochloride and chlorine etc.

Very low smoke emission.

Excellent resistance to general weathering conditions and has inherent ageing resistance

Tested by Vienna, Austria and classification according to EN 13502: Bf1-s1

Prevents the accumulation of static electricity by instantaneously draining the electro-static charges from workers. Specially designed to prevent dangerous sparks in volatile work environments.

The resilient and load bearing characteristics of the mat offers excellent anti-fatigue features to the standing worker.

For maximum effectiveness of the mat, ground the mat and keep both surfaces free of dirt.

Electrical receptivity range 1x10³ - 1x10⁶ Ohms

Every 8' should be grounded

Provides insulation to high voltage electricity and prevents dangers of electrical shock, protecting people who are working in such environments

Due to non conductive nature, the mat possesses very high corona resistance high voltage breakdown strength up to 20,000 volts for thickness of 4.5mm or over.

Provides ozone and general ageing resistance

Shows good resistance to moisture absorbing

Specially designed to resist welding flux and grinding sparks of 1300 to 1500 centigrade for less than 3 seconds.

Excellent durability and highly resistant surface for load bearing characteristics.

Reduces fatigue during prolonged standing.

Available with designs for non-slip surfaces.

Specially designed surface of mat built with a coating of silicon carbide grit facilitates extra slip resistance.

Provides excellent traction and avoids the danger of slipping

Surface covered with grit will drain liquids leaving mat dry.

Resistance to wear and tear of heavy duty applications.

Specially designed step mats available with gritted strips for extra grip.

Washable and easy to maintain

Durable Natural and Synthetic Rubber formulations with scratch resistant properties

Anti–fatigue sheeting with reduced noise even in heavy traffic areas

Special heat resistant formula available for heat cured form backing

Plain colours to suit application

NR / SBR sheeting for good mechanical properties

PVC / Nitrile sheeting for excellent oil swelling properties

EPDM sheeting for excellent weather resistant properties